(E-Series
Units available to 48" and any length)
| |
CONSTRUCTION:
|
 |
E = Formed mild or stainless
steel channel (All frame depths available).
|
| |
|
|
|
|
|
|
A = Structural aluminum extrusion (3XX,
5XX frame depths only).
|
| |
FRAME DEPTH
& GAUGE:
|
3 = 4" deep 10 ga. steel, or 1/8"
aluminum frame - underslung, motor pulley or
side mounted motor only.
|
| |
|
|
|
|
|
5 = 6 " deep 10 ga.steel or 3/16"
aluminum frame - 1/3 hp (110V) / 1/2 hp (230/460V)
maximum internally mounted.
|
| |
|
|
|
|
6 = 8 " deep 10 ga. frame - 1.0 hp
(all voltages) maximum internally mounted.
|
| |
|
|
|
|
7 = 8 " deep 7 ga. frame - 1.0 hp (all
voltages) maximum internally mounted.
|
| |
|
|
|
|
9 = 10 " deep 7 ga. frame - 1.5 hp
(all voltages) maximum internally mounted.
|
| |
MOTOR MOUNT:
|
00 = Motor underslung beneath frame.
|
| |
|
|
|
|
01 = Motor side mounted (with chain drive
and right angle reducer).
|
| |
|
|
|
07 = Motor side mounted (with hollow bore
right angle reducer).
|
| |
|
|
|
09 = Motor pulley.
|
| |
|
|
|
10 = Motor internally mounted, yet easily
accessible.
|
|
|
BELT WIDTH:
|
(INCHES) = All frames overlap belt 1/2"on
each side; exposed belt = belt width minus
1".
|
| |
|
FRAME LENGTH:
|
(INCHES) = Up to 120"L (except ET).
(FEET.INCHES) = Greater than 10'-0"L.
|
| |
|
FRAME WIDTH:
|
(3XX / 5XX) = Belt width + 4".
|
| |
|
(7XX / 9XX) = Belt width + 5" / 8 "
(TYPICAL) .
|
| E- |
5 |
10- |
18- |
11.06 |
|
(E-Series, 6" deep
frame, internally mounted motor, 18"
wide belt- 17" exposed, 11'6" long
frame). |
|
|
|
|
|
|
|
|
|
Variations: ET Series = Tubular
discharge end for low-profile entry into grinder
opening.
|
(Optional) = Constructed so
that the belt runs above frame-full belt width
usable.
|
|
Contact your LaRos representative
for assistance.
|
